Technicolor TG789vac v2 - Page 91

87
9 Internet security
DMS3-CTC-25-282 v1.0
 The Destination Interface and IP Address (range)
Or you can type a User-defined IP address (range).
 The Service type of the traffic; this can be a protocol (DNS, SMTP,...) or a specific TG789vac v2 system service.
8 Select an Action that should be done on traffic for which the firewall rules applies:
 Accept: to allow the traffic to pass
 Deny: to drop the traffic (without notification)
 Count: to let the traffic pass, but count it (Hits)
9 Click Apply.
Use Any as IP address in case all traffic for the interface should be parsed.