> Acknowledge the input with OK.
> In order to remove several channels at the same time, as described in 8.1.2
(Selecting blocks).
> After you have selected the required channels in this manner, press the yellow
function key Remove. The message “Really delete the channel(s)?” is displayed.
> Highlight with the left/right arrow keys yes or no.
> Confirm the input with OK.
These deleted channels are however retained in the complete list and can be included in the
favourites list again at any time.
8.1.3.2 Deleting from the complete list
To delete channels from the complete list, proceed as described in Section 8.1.3.1. After cal-
ling the channel list administration, press the red function key channels to jump to the
complete list, then select the Delete option.
8.1.4 Sorting channels
To sort the channels contained in the favorites list according to your requirements, call the
channel list administration as described in Section 8.1.1. Your are now in the favourites list.
> Use the blue function key Functions. A pop-up window will be displayed, listing the
functions available.
> Highlight, using the up/down arrow keys the line Sorting.
> Confirm with OK.
> Highlight, using the up/down arrow keys the channel you would like to move to
another position in the list.
> Now press the yellow function key Sort. A double-headed arrow is now displayed
next to the selected channel.
> Now you can move the highlighted channel with the up/down arrow keys and / or
the numerical keyboard to the place in the channel list, to where you would like
to move it.
> The channel is stored at the new position by pressing the yellow function key Sort.
> In order to sort several channels at the same time, select as described in 8.1.2
(Selecting blocks).
> Now press the yellow function key Sort. A double-headed arrow is now displayed
next to the selected channel block.
> Now you can move the selected channel block with the help of the up/down arrow
keys and / or the numerical keyboard to the place to where you would like to
move it.
> The channel block is stored at the new position by pressing the yellow function key
Sort.
> After configuring the channel list according to your requirements in this manner, return
to normal operation by pressing the Menu key.
35
To Next Page
Loading...
Need help?
General
