TechniSat DIGITRADIO 10 IR

136
Alarm
> Switch the alarm to Active:[On] or [O].
> Here you can select from Daily (every day of the week), Once, Weekdays
(Mon - Fri) or Weekends (Sat and Sun). Press the OK buon to apply the
seing.
Time and date
> Here you can enter the alarm time and date (if required).
First use the / buons to select the hour and press the OK buon to
accept. Then enter the minutes. Accept this by pressing the OK buon.
If Repeat> [Once] has been selected, you must also enter the date as well as
the time.
Source
> You then enter the source. The available options are BUZZER, Internet Radio,
DAB or FM. Press the OK buon to accept the seing.