TechniSat DIGITRADIO 10 IR User Manual

154
Symptom Possible cause/remedy
Bad Bluetooth connection and
dropouts
Do not exceed the maximum range for
Bluetooth of 10m.
Device automatically switches to
standby
The auto-standby function automatically
switches the device to standby aer approx.
15 minutes in the following circumstances:
No sound is played
No device is connected via Bluetooth when
the device is in Bluetooth mode
Volume is muted.
If the malfunction has not been resolved, even aer performing the checks
described, please contact the Technical Hotline.

TechniSat DIGITRADIO 10 IR Specifications

General

Radio type	Internet
Tuner type	Digital
FM band range	87.5 - 108 MHz
DAB band range	174 - 240 MHz
Supported radio bands	DAB+, FM
Preset stations quantity	60
Equalizer	Yes
RMS rated power	- W
Built-in speaker(s)	No
Display type	TFT
Display diagonal	2.8 \
Display resolution	240 x 320 pixels
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version	4.1
Coloration	Monochromatic
Thermometer	-
Antenna type	External
Product color	Black, Silver
Internet radio services supported	Spotify
On Screen Display (OSD) languages	DAN, DEU, DUT, ENG, FIN, FRE, ITA, NOR, POL, POR, SWE
Power source	AC/DC
AC input voltage	230 V
DC input voltage	5 V
AC input frequency	50 Hz
Power consumption (standby)	0.72 W
Power consumption (typical)	1.4 W
Clock mode	24h
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	5 - 90 %

Weight and Dimensions

Width	- mm