Technogym KINESIS ONE - Installation and Handling Machines; Specifications and Requirements; Installation

KINESIS ONE: Service & Maintenance Manual rev. 2.1
Page 5.1
5. INSTALLATION AND HANDLING
MACHINES
5.1. SPECIFICATIONS AND REQUIREMENTS
For correct machine installation, make sure that:
• The machine is installed on a level surface that is free of vibrations and has sufficient
carrying capacity for the combined weight of the machine and user.
• The place of installation is free of dust and sand.
• The place of installation meets the operating temperature and humidity conditions specified
in paragraph: 2.3. “ Ambient specifications”.
5.2. INSTALLATION
The machine is delivered partially disassembled, wrapped in cellophane, and fixed on top of a
wooden pallet. The machine’s arm group are delivered in cardboard boxes, wrapped in pluriball and
fixed inside the frame of the machine.
Installation and assembly procedure are provided in the proper manual supplied with
the machine.