KINESIS ONE: Service & Maintenance Manual rev. 2.1
Page 8.2
8.1. ORDINARY MAINTENANCE OPERATIONS
8.1.1. EXTERNAL CLEANING OPERATIONS
1. Using a cloth moistened with a neutral detergent (non acidic), clean the entire machine, taking
care not to rub too vigorously, especially on the keys of the display.
Never spray the cleaning product directly on the machine.
CAUTION: do not use alcohol, petrol or other chemical products.
8.1.2. CLEANING THE COVERING PANELS
1. Clean the covering panels of the machine using a cloth moistened with water.
CAUTION: do not use alcohol, benzene, or chemical products in general.
8.1.3. CHECK THE CROSS, BARS AND WEIGHT STACK PLATES
1. Check the wear status of the cross bushings and weight stack plates. Repair and/or replace any
worn parts.
2. Check the wear status of the chrome plating of the weight stack bars. Repair and/or replace any
worn parts.
3. Check the wear status of the weight stack bars and weight stack support buffers. Repair and/or
replace any worn parts.
4. Make sure the weight stack bars are firmly fastened. Repair and/or replace any worn parts.
5. Use a paper towel slightly dampened with ethyl alcohol to clean the weight stack bars of the
machine, removing dust and grime.
CAUTION: remove any surface rust spots with a metal scrubber.
6. Lubricate the bars and bushings of the plates and cross using the oil found in the service box.
7. Check the adhesive label indicating the load corresponding to the weight stack plates. Replace
any worn parts.
To Next Page
Loading...
