Technogym KINESIS ONE - Appendix; Tools to Use

KINESIS ONE: Service & Maintenance Manual rev. 2.1
Page 9.1
9. APPENDICE
9.1. TOOLS TO USE
The following tools are necessary to carry out all disassembly, adjustment and maintenance
operations on the machines:
• 17mm wrench;
• 19mm wrench;
• 17mm retchet wrench;
• 19mm retchet wrench;
• 4mm hexagonal wrench;
• 5mm hexagonal wrench;
• 6mm hexagonal wrench;
• 8mm hexagonal wrench;
• Torque wrench,
• Pliers;
• Cutter.