Technogym MA05 - Check the Weight Stack Stops; Check the Leg Press Seat Mechanism; Checking the Seat Mechanism on Low Machines; Checking the Seat Mechanism on Tall Machines

ELEMENT LINE: Service & Maintenance Manual - rev. 1.2
Page 9.4
9.3.5. CHECK THE WEIGHT STACK STOPS
1. Check the wear status of the stops. Repair and/or replace any worn parts.
2. Check the position of the stops and make sure they are firmly fastened in place.
9.3.6. CHECK THE LEG PRESS SEAT MECHANISM
1. Check the wear status of the support bars and seat pulleys. Repair and/or replace any worn
parts.
2. Clean the seat support bars using alcohol.
CAUTION: lubricate the support bars with silicon oil.
9.3.7. CHECKING THE SEAT MECHANISM ON LOW MACHINES
Perform this check on the Leg Extension, Leg Curl.
1. Check the wear status of the pulleys, support bars and seat guide. Repair and/or replace any
worn parts.
2. Clean the seat support guide bars using alcohol.
3. Lubricate the seat support guide bars using the oil found in the box service.
9.3.8. CHECKING THE SEAT MECHANISM ON TALL MACHINES
Perform this check on the Arm Curl, Arm Extension, Chest Press, Low Row, Pectoral,
Shoulder Press, Vertical Traction, Scott Bench, Inclined Bench Press and Vertical
Bench.
1. Check the wear status of the seat guide pulleys. Repair and/or replace any worn parts.
2. Clean the seat guide pulleys using alcohol.
3. Lubricate the seat support guide bars using the oil found in the box service.
9.3.9. CHECKING THE UPHOLSTERY
1. Check the wear status of the upholstery. Replace any worn parts.
9.3.10. CHECKING VARIOUS RUBBER PARTS
These operations apply to handles, knobs, mats, frame guards, bell covers, feet …
1. Check the wear status of the rubber parts used on the machine. Repair and/or replace any worn
parts.