Technogym MA05 - 10 Appendix; Tools to Use

ELEMENT LINE: Service & Maintenance Manual - rev. 1.2
Page 10.1
10. APPENDIX
10.1. TOOLS TO USE
The following tools are necessary to carry out all disassembly, adjustment and maintenance
operations on the machines:
• Small Flat Screwdriver;
• Medium Philips screwdriver;
• 13mm wrench;
• 17mm wrench;
• 22mm wrench;
• 30mm wrench;
• 3mm hexagonal wrench;
• 4mm hexagonal wrench;
• 5mm hexagonal wrench;
• 6mm hexagonal wrench;
• 8mm hexagonal wrench;
• 12mm hexagonal wrench;
• 20mm socket wrench for ring nut;
• 45mm socket for ring nut;
• Pointed tool;
• Pliers;
• Torque wrench;
• Hammer.
Tool measurements are expressed in mm.