PRINT Data$
PRINT #1, "OUTPUT 24;:CAL:PROT:SOUR:DATA?"
PRINT #1, "ENTER 24"
LINE INPUT #2, Data$
PRINT Data$
Range = Range * 10
IF Range > .009 AND Range < .011 THEN Range = .02
IF Range > .19 AND Range < .21 THEN Range = .1
LOOP WHILE Range <= 1
PRINT #1, "OUTPUT 24;:CAL:PROT:LOCK" ' Lock out calibration.
PRINT #1, "OUTPUT 24;*RST"
PRINT #1, "LOCAL 24"
CLOSE
END
C-8 Calibration Programs
2410-902-01.book Page 8 Monday, November 7, 2005 2:49 PM
To Next Page
Loading...
