Instrument re-assembly
Re-assemble the instrument by reversing the previous disassembly procedures. Make sure
that all parts are properly seated and secured and that all connections are properly made.
WARNING To ensure
continued protection against electrical shock, verify that power
line gro
und (green and yellow wire attached to the power module) is
connected to the chassis. Also make certain that the two bottom case
screws are properly installed to secure and ground the case cover to the
chassis.
5-10 Disassembly
2410-902-01.book Page 10 Monday, November 7, 2005 2:49 PM
To Next Page
Loading...
Need help?
General
