Tektronix MSO3000 Series User Manual

Application E xamp les
Taking Cursor Measure ments
You can use the cursors to take quick measurements on a waveform. To measure the ring frequency at the rising edge of the signal:
1. Push channel 1 to select the channel 1 signal.
2. Push Measure.
3. Push Configure Cursors.
Add Mea-
surement
Remove
Measure-
ment
Indicators
More
Bring
Cursors On
Screen
Configure
Cursors
246 DPO3000 Series Oscilloscopes User Ma nual

Tektronix MSO3000 Series Specifications

General

Brand	Tektronix
Model	MSO3000 Series
Category	Test Equipment
Language	English