Tektronix MSO3000 Series - Saving with One Button Push

Save and Recall I
nformation
Push Menu Off to cancel the save operation,
or select a Save to Selected File item on
the side menu t
o c omplete the operation.
5. Save the file.
Save to
Selected
File
Quick Tips
Recalling the Default Setup. Push Default Setup on the front-panel to initialize the oscilloscope to a known setup.
(See page 47, Using the Default Setup.)
Saving with One Button Push
After you have de fined the save/recall parameters with the Save/Recall Menu button and menu, you can save files with a
single push of the Save button. For example, if you have defined the save operation to save waveform data to a USB drive,
then eac
hpushoftheSave button will save current waveform data to the defined USB drive.
1. To define the S ave button behavior, push
Save/Recall Menu.
2. Push A
ssign Save to button.
Save
Screen
Image
Save
Waveform
Save
Setup
Recall
Wavefo
rm
Recall
Setup
Assign
Save
|to
Setup
File
Utilit
ies
3. PushtheactiontoassigntotheS ave button.
Assi
gn
Save to
Screen
Image
Waveform
Setup
130 MSO3000 and DP O3000 Series Oscilloscopes User Manual