Tektronix MSO3000 Series - Erasing Oscilloscope Memory

Save and Recall I
nformation
NOTE. If you have multiple printers connected
to the oscilloscope at the same time, the
oscilloscope
will print to the printer listed in the
Utility> Utility Page> Print Setup> Select Printer
menu item.
Printing wi
th One Button Push
Once you have connected a printer to your oscilloscope and set up print parameters, you can print current screen images
with a single push of a button:
Pus
h the printer icon button in the lower left
corner of the front-panel.
Erasing Oscilloscope Memory
You can erase all setup and waveform information saved in the nonvolatile oscilloscope memory with the TekSecure function.
If you have acquired confidential data on your oscilloscope, you may want to execute the TekSecure function before you
return the oscilloscope to general use. The TekSecure function:
Replaces all waveforms in all reference memories with null values
Replaces the current front-panel setup and all stored setups with the default setup
Displays a confirmation or warning message, depending on whether the v erifi cation is successful or unsuccessful
To use TekSecure:
1. Push Utility.
2. Push Utility Page.
Utility
Page
3. Turn multipurpose knob a and select Config.
Config
MSO3000 and DPO 3000 Series Oscilloscopes User Manual 137