Save and Recall I
nformation
7. Turn multipurp
ose knob a to scroll through
the list of letters, numbers, and other
characters to find the first character in the
printer name t
hat you want to enter.
If you are using a USB keyboard, use
the arrow keys to position the insertion
point and typ
e in the printer name. (See
page 28, Connecting a USB K e yboard to
Your Oscilloscope.)
ABCDEFGHIJK
LMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
0123456789_=+-!@#$%^&*()[]{}<>/~'”\|:,.?
8. Push Select or Enter Character to let the
oscilloscope know that you have picked the
proper cha
racter to use.
You can use the lower menu to edit the
name, as needed.
Enter
Character
Back
Space
Delete
Clear
9. Continue scrolling and pushing Select until
you have entered all the desired characters.
10. P ush the down arrow key to move the
character cursor down a row to the Server
Name field.
Add
Printer
11. Turn multipurpose knob a and push Select
or Enter Character as often as needed to
enter the name.
12. If desired, push the down arrow key to move
the c
haracter cursor down a row to the
Server IP Address: field.
OK Ac
cept
13. Tur
n multipurpose knob a and push Select
or Enter Character as often as needed to
enter the name.
14. When done, push OK Accept.
136 MSO3000 and DP O3000 Series Oscilloscopes User Manual
To Next Page
Loading...
