p
Model 880 DEPOSITION CONTROLLER
y
SECTION 3.XX
e page 117 of 275 ^
<update screens>
The following screens are examples of what may appear after a PURGE/REBOOT sequence:
The letter designators are: P Film Parameters
I I/O Programs
A Process Accounting
S Process Sequences
Press the area indicated to acknowledge memory loss in the memory sectors represented by the designators.
The memory loss message is meant to alert the user that a change in memory contents has occurred in the
areas represented by the letter designators and that parameter/program dependent processes need to be
evaluated and the unit reprogrammed accordingly.
To Next Page
Loading...