EasyManua.ls Logo

Telemark 880 - Page 220

Telemark 880
278 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
p
Model 880 DEPOSITION CONTROLLER
y
SECTION 6.XX
e page 219 of 276 ^
Parameter 47 xtal life/status from sensor 2
access index: XLIFE2
Value Range 0 To 99
Units Percent
xtal life/status from sensor 2. 2
nd
in a contiguous block of 8. Associated card needs to be physically
installed and enabled before a reboot.
______________________________________________________________________
Parameter 48 xtal life/status from sensor 3
access index: XLIFE3
Value Range 0 To 99
Units Percent
xtal life/status from sensor 3. 3
rd
in a contiguous block of 8. Associated card needs to be physically installed
and enabled before a reboot.
______________________________________________________________________
Parameter 49 xtal life/status from sensor 4
access index: XLIFE4
Value Range 0 To 99
Units Percent
xtal life/status from sensor 4. 4
th
in a contiguous block of 8. Associated card needs to be physically installed
and enabled before a reboot.
______________________________________________________________________
Parameter 50 xtal life/status from sensor 5
access index: XLIFE5
Value Range 0 To 99
Units Percent
xtal life/status from sensor 5. 5
th
in a contiguous block of 8. Associated card needs to be physically installed
and enabled before a reboot.
______________________________________________________________________
Parameter 51 xtal life/status from sensor 6
access index: XLIFE6
Value Range 0 To 99
Units Percent
xtal life/status from sensor 6. 6
th
in a contiguous block of 8. Associated card needs to be physically
installed and enabled before a reboot.
______________________________________________________________________
Parameter 52 xtal life/status from sensor 7
access index: XLIFE7
Value Range 0 To 99
Units Percent
xtal life/status from sensor 7. 7
th
in a contiguous block of 8. Associated card needs to be physically installed
and enabled before a reboot.
______________________________________________________________________
Parameter 53 xtal life/status from sensor 8
access index: XLIFE8
Value Range 0 To 99
Units Percent
8
th
in a contiguous block of 8. xtal life/status from sensor 8. Associated card needs to be physically installed
and enabled before a reboot.
______________________________________________________________________

Table of Contents