p
Model 880 DEPOSITION CONTROLLER
y
SECTION 6.XX
e page 259 of 276 ^
10 SMAXP Source output max power (additional) percentage.
0.0 to 100.0 percent.
11 SOCHL Source output analog channel number 1..8
12 MTOOL Master tooling 10.0-400.0%, like tooling.
13 MINSC Minimum Starting Contributors, 1..8 .
14 MINRB Minimum Remaining Backups for good start, 0..7 .
15 PLTUN Platoon strength, min. # of contrib channels 1..8 .
16 SFAILM Sensor failure mask, how to recover when averaging mode has a sensor
channel failure (FMSK_class)
0 FMSK_NONE No channel-failure rate-glitch correction.
Whatever happens with missing contributor occurs.
1 FMSK_FULL_MASK Full substitute via aggreg. multi-plier for rate
glitch continuously.
17 RSYN Rotator synchronization type, none, delayed, feedback
18 RSYNTM Rotator synchronization time 2..999 secs.
______________________________________________________________________
Table of SnsChnlAtrb_class CPARM# values as third parameter
when second parameter for CHNL# channel 1-8.
----------------------------------------------------------
CPARM# Label Description
1 SSMOD Starting Mode: of SMOD_class 1..3
0 SMOD_OFF channel not active
1 SMOD_ACTIVE channel active at start
2 SMOD_STANDBY channel needed as backup
2 SFOP Sensor Fail Operation of SFMOD_class 1..2
0 SFMOD_NOTHING no special failure operation
1 SFMOD_FILM_FAIL film failure signalled.
3 SBAKS Sensor Backup list, ordered list of channel numbers
which is saved as long integer form of decimal
list of 8 digits, from 00000000 (0) to 88888888.
Any form not containing the digit 9 and mathematically
To Next Page
Loading...