13 MPH200 series video encoders WebUI user manual
Event management for video
For video it can trigger actions such as changing video settings, frame
rate, bit rate and video quality for each video prole based on events.
An example when the video bit rate
and frame rate change when an
event triggered.
Event subscription (for triggering)
Event subscription (for fallback from
triggered state)
Signal lost for video 1 and 2 Signal restored for video 1 and 2
Camera tempered for video source 1 and 2 Temper removed for video source 1 and 2
Motion detection above the threshold for
video 1 and 2
Motion Detection below the threshold for
video 1 and 2
Event subscription (for triggering)
Event subscription (for fallback from
triggered state)
I/O Inputs activation I/O Inputs deactivation
Available events for video.
Event management for contact closure (digital I/O)
For contact closure it can trigger actions such as changing output state
in case of an event.
Available events for contact closure.
To Next Page
Loading...
