Teleste MPH241 - Video Streaming Performance

24 MPH200 series video encoders WebUI user manual
Available video streaming performance for MPH200 series encoders.
Note! Video trafc could overload Fast Ethernet throughput
depending on number of streams/bitrate combination. Be sure that
the conguration does not exceed Fast Ethernet port throughput.
Congurations for single input in two channel encoder (NTSC/PAL)
MPEG-2/
MPEG-4/H.264
Encoder 1
MPEG-2/
MPEG-4/H.264
Encoder 2
MPEG-2/
MPEG-4/H.264
Encoder 3
MPEG-2/
MPEG-4/H.264
Encoder 4
De-
interlace
Privacy
zone
masking
Motion
detection
Tampering
Text
overlay
Total
sessions
SRTP
sessions
Audio
D1 30fps
6Mbps
4CIF 30fps
6Mbps
30 fps Yes
40 chars/
encoder
3 3
1xAAC stereo
D1 30fps
6Mbps
4CIF 15fps
6Mbps
15 fps Yes
QCIF
5fps
Yes
40 chars/
encoder
3 3
1xAAC stereo
D1 30fps
6Mbps
2CIF 30fps
3Mbps
Yes
QCIF
5fps
Yes
40 chars/
encoder
3 3
1xAAC stereo
CIF 30fps
1.5Mbps
CIF 30fps
1.5Mbps
CIF 30fps
1.5Mbps
CIF 30fps
1.5Mbps
Yes
QCIF
5fps
Yes
40 chars/
encoder
4 4
1xAAC stereo
Congurations for single input in single channel encoder (NTSC/PAL)
MPEG-2/
MPEG-4/H.264
Encoder 1
MPEG-2/
MPEG-4/H.264
Encoder 2
MPEG-2/
MPEG-4/H.264
Encoder 3
MPEG-2/
MPEG-4/H.264
Encoder 4
De-
interlace
Privacy
zone
masking
Motion
detection
Tampering
Text
overlay
Total
sessions
SRTP
sessions
Audio
D1 30fps
6Mpbs
D1 30fps
6Mpbs
4CIF 30fps
6Mbps
4CIF 30fps
6Mbps
30fps Yes
QCIF
5fps
Yes
40 chars/
encoder
8 4
1xAAC stereo
1080p 30fps
20Mbps
Yes
QCIF
5fps
Yes
40 chars/
encoder
2 1
1xAAC
stereo
720p 30fps
10Mbps
Yes
QCIF
5fps
Yes
40 chars/
encoder
4 2
1xAAC
stereo
Video streaming performance
The following performance table shows the performance of MPH200
devices in encoding and streaming video signal per video input
simultaneously.
Total video sessions = original video stream + multiplied streams.
SRTP (Secure Real-time Transport Protocol) = encrypted RTP stream.
De-interlacing is done by choosing right prole.