88 MPH200 series video encoders CLI user manual
dns <-mode=dns_mode>[<-domain=search_domains>][<-servers=dns_
servers>]
Description:
Sets DNS parameters. If no arguments are passed, the command
will display current configuration
<dns_mode>: manual/dhcp
If manual mode is selected, search domains and dns servers
should be provided
dhcp mode is available only if ‘ip mode’ is set to DHCP.
Otherwise only manual mode is available.
[<search_domains>]: Comma seperated list of search domains
in decreasing order of priority (Upto 3 search domains are
supported)
[<dns_servers>]: Comma seperated list of dns servers in
decreasing order of priority (Upto 3 search dns servers are
supported)
ntp <-mode=ntp_mode> [<-servers=ntp_servers>]
Description:
Sets NTP parameters. If no arguments are passed, the command
will display current configuration
<ntp_mode>: manual/dhcp
If manual mode is selected, ntp server list should be provided
dhcp mode is available only if ‘ip mode’ is set to DHCP.
Otherwise only manual mode is available.
[<ntp_servers>]: Comma seperated list of ntp servers in
decreasing order of priority (Upto 3 search ntp servers are
supported)
hostname [<hostname_string>]
Description:
Sets the hostname. If no arguments are passed, the command
will display current configuration
[<hostname_string>]: Hostname upto 32 characters (without
special characters or spaces)
Entering help dns displays information about the dns command:
Entering help swud displays information about the swud command:
Entering help ntp displays information about the ntp command:
Entering help hostname displays information about
the hostname command:
Use the hostname command to set
a hostname to the device.
Use the dns command to set DNS
parameters to the device.
Use the swud command to change
device’s rmware.
To Next Page
Loading...
