Tenda AP4 User Manual

128
A progress bar is displayed on the page. Wait for it to elapse.
8.2.3 Upgrade firmware
This function upgrades the firmware of the device for more functions and higher stability.
To prevent damaging the device, verify that the new firmware version is applicable to the device before
upgrading the firmware and keep the power supply of the device connected during an upgrade.
Configuration procedure
Step 1 Download the file of the latest firmware version for the device from www.tendacn.com to
your local computer, and unzip it.
Step 2 Log in to the web UI of the device and choose Tools > Maintenance.
Step 3 Click Upgrade.
Step 4 Select the file from your local computer for upgrading the firmware. Ensure that the suffix
of the upgrade file is .bin.
----End
Wait for the progress bar completes. Then log in to the web UI of the device. On the Status page,
check if the current Firmware Version is consistent with the firmware version you selected for
upgrade.
After the device is upgraded, you are recommended to restore the factory settings of the device to get
the best experience.

Tenda AP4 Specifications

General

5 GHz	No
2.4 GHz	Yes
Frequency band	2.4 - 2.483 GHz
Number of users	5 user(s)
Operating modes	Access Point (AP), Repeater, WISP
Transmitting power	20 dBmW
Maximum indoor range	40 m
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	10, 100 Mbit/s
Maximum data transfer rate	300 Mbit/s
Output current	0.6 A
Output voltage	9 V
Power consumption (typical)	4 W
Placement	Table, Wall
Certification	FCC, CE, VoC, Rohs
Product color	Black
LED indicators	LAN, System, WLAN, WPS
Antenna gain level (max)	5 dBi
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	1
Security algorithms	64-bit WEP, 128-bit WEP, WPA, WPA2, WPA2-PSK
Number of SSID supported	8
Service Set Identifier (SSID) features	SSID broadcast on/off
Supported network protocols	http/https
Storage temperature (T-T)	-30 - 70 °C
Operating temperature (T-T)	-10 - 45 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	31.5 mm
Width	148 mm
Height	146.2 mm