Terex RT700 - Crew Member Responsibilities; Management Responsibility for Safety

Issued: July 2002Page 1-6
RESPONSIBILITIES OF ALL CREW MEMBERS
!
MANAGEMENT RESPONSIBILITY
!
1. Unsafe conditions or practices must be corrected.
2. Obey all warning signs.
3. Watch out for your safety and the safety of others.
4. Know and understand proper machine erection and rigging procedures.
5. Alert operator and signal person of dangers, such as power lines, unstable
ground etc.
1. Operator's must be competent, physically fit and if required licensed.
2. Operator, signal people and riggers must be trained in correct crane operation
and use.
3. Operator and Signal people must know standard crane signals.
4. Have a supervisor at job site to be responsible for job safety.
5. Crew members given specific safety responsibilities and instructed to report
any unsafe conditions to supervisor.
6. Supply the weight on the load to be lifted to the operator.
7. Verify that all crew members are familiar with OSHA, ANSI B30.5
requirements as well as instructions in manuals.