Issued: July 2002Page 1-8
OPERATOR’S SAFETY CHECK
!
1. Safety related items must be in place.
2. Check machine log book, to see if periodic maintenance and inspections have
been performed.
3. Ensure that necessary repairs have been completed.
4. Inspect wire rope for damage (kinks, broken wires etc.)
5. Be sure no unauthorized field modifications have been made.
6. Check for air and hydraulic oil leaks.
7. Check control positions before starting engine.
8. After starting engine, check all gauges and indicators for proper readings.
9. Test all controls.
10. Check brakes and clutches.
11. Check load brakes by lifting a load a few inches off the ground and holding it.
OPERATOR AIDS CHECK
!
Ensure that the listed items are in place and operational.
1. Boom hoist upper angle limit switch. (Lattice Boom).
2. Boom angle indicator.
3. Backup Alarms.
4. Anti-Two Block devices.
5. Overload Protection, Load Indicators, Rated Capacity Limiters
To Next Page
Loading...
Need help?
General
