Issued: July 2002Page 1-11
TRAVEL
!
1. Always wait until machine has stopped before getting on and off equipment.
Do not jump on or off.
2. Do not use controls and steering wheel as hand holds.
3. Keep the machine clean and dry.
4. Replace all broken ladders.
5. Keep non-slip surfaces in good condition.
1. Care must be taken when cranes are driven (traveled) whether on or off the job
site.
2. Watch for people, power lines, low or narrow clearance, bridge or road load
limits, steep hills or uneven terrain.
3. Position boom in line with the direction of travel.
4. Inflate tires to specified pressure.
5. Travel slowly and avoid sudden stops and starts.
6. It is recommended that the seat belt be used during transit and travel.
7. Make sure travel surface can support weight of machine and load.
8. Always set parking brakes when parking machine.
To Next Page
Loading...
Need help?
General
