EasyManua.ls Logo

Terex RT700 - Page 377

Terex RT700
404 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...



GREER COMPANY
1918 EAST GLENWOOD PLACE, SANTA ANA, CA 92705 PN W450250 Rev A 06/01/00
TEREX RCI 510 RATED CAPACITY INDICATOR OPERATOR'S MANUAL TEL:(714) 259-9702 FAX:(714) 259-7626
33 of 35
COUNTERWEIGHT
(CTWT)
A weight used to supplement the weight of the crane to provide
stability for lifting.
CURSOR A pointer on a display that indicates the position where data is to be
entered.
DEDUCT
A reduction in rated capacity for an unused stowed or erected
attachment.
DIRECTION The direction of rotation of the superstructure.
DUTY A working configuration on a crane usually contained in a single column of a
capacity chart.
ERECTED ATTACH-
MENT
An attachment on the main boom fitted in its working position.
EXTENSION SENSOR A device that measures the extension of the telescoping sections of a boom.
FUNCTION KICK-OUT A device that disengages certain crane functions whose movement could
cause overload or two-blocking.
HEIGHT The vertical distance from the ground to the tip of the boom or attachment.
HORIZONTAL Parallel to the horizon.
INFORMATION SCREEN A display that gives information supplemental to the information on the
pictograph.
INTEGRATED CIRCUITS A tiny complex of electronic components and connections on a small slice of
material (such as silicon).
JIB Something attached such as a lattice fly or jib on a crane boom.
MANUAL SECTION The tip section of the main boom that can be telescoped independently of
the other sections.
MICROPROCESSOR A computer processor contained on an integrated chip.
MOMENT The product of force and distance to a particular axis or point.
OPERATOR ALARMS Alarms that can be set by the operator, which provide working limits
additional to the chart limits.
OUT OF DUTY A point which is either longer than the longest permitted radius or lower than
the lowest permitted angle on a capacity chart

Table of Contents

Related product manuals