TESTO 330 User Manual

2 Safety and the environment
10
2.3. Product-specific safety instructions
CAUTION
Acid in the sensors.
May cause chemical burns.
> Do not open the sensors.
Eye contact: Rinse the affected eye thoroughly under running
water for 10 minutes, keeping the eyelids wide open and
protecting the unaffected eye. Remove contact lenses
wherever possible.
CAUTION
Acid in the sensor filters.
May cause irritation to the skin, eyes or respiratory tract.
> Do not open the sensor filters.
Eye contact: Rinse the affected eye thoroughly under running
water for 10 minutes, keeping the eyelids wide open and
protecting the unaffected eye. Remove contact lenses
wherever possible.
Skin contact: Remove the injured person’s contaminated
clothing, ensuring self-protection. Rinse affected skin areas
under running water for at least 10 minutes.
Inhalation: Move to fresh air and make sure that breathing is
unrestricted.
Ingestion: Rinse mouth out and spit out liquid. If conscious,
drink 1 glass of water (approx. 200 ml). Do not induce vomiting.
2.4. Protecting the environment
> Dispose of faulty rechargeable batteries/spent batteries in
accordance with the valid legal specifications.
> At the end of its useful life, send the product to the separate
collection for electric and electronic devices (observe local
regulations) or return the product to Testo for disposal.
> The button cell used in the instrument contains 1,2-
Dimethoxyethane (CAS 110-71-4). See EC Regulation No.
1907/2006 (REACH) Art. 33.

TESTO 330 Specifications

General

Protection class	IP40
O2 measurement range	0 to 21 % O2
CO measurement range	0 to 4000 ppm
Measurement parameters	O2, CO, CO2
Resolution	0.1 % O2
Storage temperature	-20 to +50 °C