TESTO 330 - Printer; Bluetooth

6 Using the product
49
Show or hide measurement types:
1. Select measurement type: [▲], [▼]
2. Enable / disable measurement type: [ ] (enabled), [ ]
(disabled)
3. Save selection: [Finished].
6.1.2.8. Printer
The headers (lines 1-3) and the footnotes for the printout can be
set. The printer that is used can be enabled.
Calling up the function:
Enabling the printer:
The printer 0554 0543 can only be selected after the
Bluetooth
®
-interface has been enabled, see Bluetooth
®
,
page 49.
1. Select Printer → [OK].
2. Select the printer: [▲], [▼] → [OK].
- The printer is enabled and the menu Printer is opened.
Customizing the printout:
1. Customize Printout → [OK].
2. Select function: [▲], [▼] → [Edit].
> Enter values for Line 1, Line 2, Line 3 and the Footnote
> Print out system data and/or customer data: [ ]
3. Save the entry: select [Finished].
6.1.2.9. Bluetooth
®
This menu is only available if the instrument is equipped with
Bluetooth option. The Bluetooth module can be switched on / off.
Calling up the function:
Setting preferences:
> Set parameter → [OK].