TESTO 330 - Using the Product; Setting Preferences

6 Using the product
45
6 Using the product
6.1. Setting preferences
6.1.1. Assigning the right function key
The right function key can have a function from the Options menu
assigned to it. The menu Options is accessed via the left function
key and is available in many different menus. This assignment is
only valid for the currently opened menu / the opened function.
✓ A menu / function is opened in which the Options menu is
displayed on the left function key.
1. Press [Options] .
2. Select option: [▲], [▼].
Depending on the menu / function from which the Options menu
was opened, the following functions are available.
3. Assign the selected function to the right function key. Press
6.1.2. Device settings
It is assumed that the contents of the chapter First steps
(see
First steps
, page 33) are known.
Calling up the function:
6.1.2.1. Measurement view
The measurement parameters / units and the display
representation (number of meas. views displayed per display page)
can be set.
The preferences are only valid for the currently chosen
measurement type, which is indicated by the symbol in the info
field.
Total overview of selectable measurement parameters and units
(available selection depends on the chosen measurement type):
Display Measurement parameter
Tstack Flue gas temperature
Tamb Combustion air temperature
Tsensor
Instrument temperature
Pump
Pumping capacity
O2
Oxygen