TESTO 330 - Date; Time; Energy Management; Display Brightness; Choose Measurement Type

6 Using the product
48
6.1.2.4. Date / time
Date, time mode and time can be set.
Calling up the function:
> [ ] → Device Settings → [OK] → Date/Time → [OK]
Setting date/time:
1. Select parameter: [◄], [▲], [▼] → [Edit].
2. Set parameter: [▲], [▼] and partly [◄], [►] → [OK].
3. Save changes: [Save].
6.1.2.5. Energy management
Auto-Off and switching off of the display light in rech. batt.
operation can be set.
Calling up the function:
Setting preferences:
1. Select function or parameter: [▲], [▼] → [Edit].
2. Set parameter: [▲], [▼] and partly [◄], [►]→ [OK].
3. Save changes: [Finished].
6.1.2.6. Display brightness
The intensity of the display illumination can be set.
Calling up the function:
Setting preferences
> Set parameter: [◄], [►] → [OK].
6.1.2.7. Choose measurement type
Individual measurement types can be shown or hidden. These are
displayed or hidden accordingly under Measurement options.
Call up function: