TESTO 330 - CO2 Ambient

6 Using the product
67
Performing the measurement:
- The measurement starts and the meas. view is displayed
graphically (trend display).
- An audible alarm signal is triggered when the alarm limit is
reached.
3. Confirm the message: [OK].
Options:
> [Options] → Clipboard: Data are saved to the clipboard.
> [Options] → Delete clipboard: Any data saved to the clipboard
is deleted.
> [Options] → Save: The meas. views are saved in a protocol.
> [Options] → A-Thresh.: The alarm thresholds menu is opened.
6.2.13. CO2 ambient
✓ An ambient CO2 probe (0632 1240) must be connected.
In order to obtain correct meas. views, it is imperative to
enter the prevailing abs. pressure. This can be entered
directly (Pressure Absolute), or it is automatically
calculated when entering Altitude and barometric pressure
(Pressure Barom.).
Calling up the function:
Performing the measurement:
1. Select parameter → [Edit].
2. Enter data. [▲], [▼] and partly [◄], [►]→ [OK].
- The CO2amb is displayed.
Options:
> [Options] → Clipboard: Data are saved to the clipboard:
> [Options] → Delete clipboard: Any data saved to the clipboard
is deleted.
> [Options] → Save: The meas. views are saved in a protocol.
> [Options] → Show Graphic: The meas. views are displayed in
form of a line graph.