TESTO 330 - Differential Temperature; O2 Air

6 Using the product
64
6.2.8. Differential temperature
✓ The differential temperature set (0554 1204) must be
connected.
Calling up the function:
Performing the measurement:
- The meas. views and the calculated differential temperature (T1
T2) are displayed.
Options:
> [Options] → Clipboard: Data are saved to the clipboard.
> [Options] → Delete clipboard: Any data saved to the clipboard
is deleted.
> [Options] → Save: The meas. views are saved in a protocol.
> [Options] → Show Graphic: The meas. views are displayed in
form of a line graph.
> [Options] → Measurement view: (This function is not available
during a measurement): The measurement view menu is
opened.
6.2.9. O2 air
✓ An O2 dual wall clearance probe (0632 1260) must be
connected.
Calling up the function:
Performing the measurement:
- The meas. view is displayed.