CC1101
SWRS061H Page 95 of 98
0x3D (0xFD): RCCTRL0_STATUS – Last RC Oscillator Calibration Result
Contains the value from the last run of the RC oscillator calibration routine.
For usage description refer to Application Note AN047 [4].
30 Soldering Information
The recommendations for lead-free reflow in IPC/JEDEC J-STD-020 should be followed.
31 Development Kit Ordering Information
Orderable Evaluation Module
CC1101 Development Kit, 433 MHz
CC1101 Development Kit, 868/915 MHz
CC1101 Evaluation Module Kit, 433 MHz
CC1101 Evaluation Module Kit, 868/915 MHz
Figure 34: Development Kit Ordering Information
To Next Page
Loading...
Need help?
General
