1.3 REACH Compliance
In compliance with the Article 33 provision of the EU REACH regulation, this EVM includes component(s)
containing at least one Substance of Very High Concern (SVHC) above 0.1%. These uses from Texas
Instruments do not exceed 1 ton per year. The SVHC’s are listed in Table 1-1.
Table 1-1. REACH Compliance
Component
Manufacturer Component type Component Part Number SVHC Substance
SVHC CAS (when
available)
Tensility Power Cable 10-02937 Lead 7439-92-1
Rosenberger FPD Link Connector D4S20G-400A5-C Lead 7439-92-1
Littelfuse Power fuse 0154010.DR Lead 7439-92-1
1.4 EMC, EMI, and ESD Compliance
Components installed on the product are sensitive to Electrostatic Discharge (ESD). It is recommended this
product be used in an ESD controlled environment. This may include a temperature and/or humidity controlled
environment to limit the buildup of ESD. It is also recommended to use ESD protection such as wrist straps and
ESD mats when interfacing with the product.
The product is used in the basic electromagnetic environment as in laboratory conditions, and the applied
standard is as per EN IEC 61326-1:2021.
2 J721E EVM Overview
Figure 2-1. J721E EVM Board
Introduction www.ti.com
6 Jacinto7 J721E/DRA829/TDA4VM Evaluation Module (EVM) SPRUIS4D – MAY 2020 – REVISED MARCH 2022
Submit Document Feedback
Copyright © 2022 Texas Instruments Incorporated
To Next Page
Loading...
Need help?
General
