120 Connectivity
Deleting Variables, Flash Applications, or Folders
1. Press 2° to display the VAR-LINK screen.
2. Select the variables, folders, or Flash applications to delete.
• To select a single variable, Flash application, or folder, move the
cursor to highlight it and press † to place a checkmark (Ÿ)
beside it.
– If on the default
VAR-LINK screen, this selects the folder and
its contents. Collapsed folders become expanded when
selected.
– If selecting a Flash App (from the F7 tab), this selects the
App folder and its contents. A checkmark appears beside
the folder, but not beside the contents. Collapsed Flash App
folders do not automatically become expanded.
Note: You cannot delete the
Main folder.
Receiving unit
The receiving unit has a variable with the same
name as the specified variable being sent.
• To overwrite the existing variable, press ¸.
(By default,
Overwrite = YES.)
• To store the variable to a different name, set
Overwrite = NO. In the New Name input box,
type a variable name that does not exist in the
receiving unit. Then press ¸ twice.
• To skip this variable and continue with the next
one, set Overwrite = SKIP and press ¸.
• To cancel the transmission, press N.
Receiving unit
The receiving unit does not have enough memory
for what is being sent. Press N or ¸ to cancel
the transmission.
Shown on: Message and Description:
New Name is active only if you
change Overwrite to NO.
To Next Page
Loading...
