132 Memory and Variable Management
Resetting the Memory
From the MEMORY screen:
Important: To delete individual (instead of all) variables, use
VAR-LINK.
3. When prompted for confirmation, press ¸.
The TI-89 Titanium displays a message when the reset is complete.
Note: To cancel the reset, press N instead of ¸.
4. Press ¸ to acknowledge the message.
Displaying the VAR-LINK Screen
The VAR-LINK screen lists the variables and folders that are currently
defined. After displaying the screen, you can manipulate the variables
and/or folders.
Displaying the VAR-LINK Screen
Press 2 °. By default, the VAR-LINK screen lists all user-defined
variables in all folders and with all data types.
1. Press ƒ.
2. Select the applicable item.
Item Description
RAM 1:All RAM: Resetting RAM erases all data and
programs from RAM.
2:Default: Resets all system variables and modes to
their original factory settings. This does not affect
any user-defined variables, functions, or folders.
Flash ROM 1:Archive: Resetting Archive erases all data and
programs from Flash ROM.
2:Flash Apps: Resetting Flash Apps erases all Flash
applications from Flash ROM.
3:Both: Resetting both erases all data, programs,
and Flash applications from Flash ROM.
All Memory Resetting will delete all data, programs, and Flash
applications from RAM and Flash ROM.
To Next Page
Loading...
Need help?
General
