Texas Instruments TI-89 Titanium Short User Manual

Getting Started 1
1
Getting Started
Initial start-up
Installing the AAA Batteries
The TI-89 Titanium uses four AAA alkaline batteries and a backup silver
oxide battery (SR44SW or 303). The backup batteries are already
installed, and the AAA batteries are provided with the product.
1. Remove the battery cover from the back of the calculator.
2. Unwrap the four AAA batteries provided with your product and
insert them in the battery compartment. Arrange the batteries
according to the polarity (+ and -) diagram in the battery
compartment.
3. Replace the battery cover on the calculator. The cover should snap
into place.
Turning on your TI-89 Titanium for the first time
After installing the batteries included with the calculator, press ´. The
Apps desktop appears.

Texas Instruments TI-89 Titanium Specifications

General

Display Type	LCD
Display Resolution	160 x 100 pixels
CPU	Motorola 68000
CPU Speed	16 MHz
RAM	256 KB
Flash ROM	2.7 MB
Programming Language	TI-BASIC, Assembly
Power Source	4 AAA batteries
Connectivity	I/O port
Dimensions	7.5 x 3.5 x 1 inches