3 Software
3.1 Software Description
The required software is available at the TI Gallery, and is run from the web browser, provided that Google
Chrome
™
, Firefox
®
, or Safari
®
is used. If this is desired, then TI Cloud Agent needs to be installed as a browser
extension as well as on the PC. When the application is launched, instructions appears for installing TI Cloud
Agent. The software can also be run natively on the PC. If this is desired, then GUI Composer Runtime needs
to be installed natively. To install GUI Composer Runtime, click on the downwards-facing arrow inside one of the
applications listed in the Gallery, and look towards the bottom set of links that appear. After selecting the native
operating system, open the installer and follow the prompts to install the program.
3.1.1 Software Installation
The tool can be launched either through a web browser or as a native application.
3.1.2 Web Browser
1. Navigate to Developer Gallery.
2. Search for the USBCPD Application Customization Tool in the Gallery.
3. Once found, click on the card that has the correct tool.
4. A new tab opens with the application launched. If TI Cloud Agent is not already installed, then instructions
appear for installing the required software.
3.1.3 Native Application
1. Navigate to Developer Gallery.
2. Search for the USBCPD Application Customization Tool in the Gallery.
3. Once found, click on the downwards-facing arrow on the bottom left side of the card, and look towards the
top set of links that appear. Select the native operating system and open the installer. See figure below for
the download button.
Click here to install the GUI for your na
ve opera
ng system
Figure 3-1. Application Customization Tool Download
4. Once the installer is open, follow the directions to install the application.
www.ti.com Software
SLVUCP9A – NOVEMBER 2023 – REVISED MARCH 2024
Submit Document Feedback
TPS25751 Evaluation Module 9
Copyright © 2024 Texas Instruments Incorporated
To Next Page
Loading...
Need help?
General
