If the system is fitted with a Premier RKP16 Plus the Instant
light will also illuminate.
To change from Instant Stay to Delayed Stay, proceed
as follows:
If your system is fitted with a Premier RKP16 Plus the Instant
light will go off.
Arming and Disarming Partitions
This section covers arming and disarming partitions. In order to use
these procedures the following requirements must be configured:
The alarm system must be split into one or more partitions.
Your Access code must be assigned to more than one
partition.
The keypad that you use to operate the alarm system must be
assigned to multiple partitions OR your Access code is
enabled for Global Access.
Away Arming Partitions
This option allows you to Away arm one or more partitions.
To Away arm selected partitions, proceed as follows:
If the Quick Arm feature is enabled (see page 42) you can
omit step 1 from the above procedure.
Stay Arming Partitions
This option allows you to Stay arm one or more partitions.
To Stay Arm selected partitions, proceed as follows:
Disarming Partitions
This option allows you to disarm one or more partitions.
To disarm selected partitions, proceed as follows:
To Next Page
Loading...
