Texecom Premier 816 - Specifications; Control Panel; All Models Large & Small Polymer; All Models Metal

Specifications Premier 412/816/832 Installation Manual
78 INS159-13
6. Specifications
Control Panel
All Models Large & Small Polymer
Current
Current Consumption
50mA
Maximum Current Available
0.3A charge
1.1A
Rated Output
Battery
Arrangement
Battery
Charge
Rated Output (Amps)
12h
1 x 7Ah
0.3A
0.533A
Standby and Recharge Times
EN50131-1
Grade 1
Grade 2
Minimum Standby Period
12h
12h
Maximum Recharge Time
72 Hrs
72 Hrs
Control Panel
Power Supply
Type A
Rated Input:
100V - 240V @ 50/60Hz; 1A
Rated Output Current @ 55°C::
1.5A MAX
Rated Output Voltage:
13.7Vdc +/- 2%
Mains Terminal Block Fuse:
250Vac; 3-3.15A Slow/Medium Blow
Maximum rating of each power output (note that these are not considered to
be "independent power outputs" according to EN50131-6
Aux 12V
Siren
Network
Battery
1.0A
1.0A
1.0A
2.5A
Standby Current
50mA
Output Voltage Range:
13.0V to 13.9V
Maximum Ripple Voltage:
0.5V pk-pk
Battery type:
sealed lead acid, up to 7Ah, Maximum
recharge time 72h
Battery Low Voltage Signal:
10.5V
Deep Discharge protection:
8.0V
Fuses (Electronic PTC)
F1 (2.5A) Battery Fuse
F2 (900mA) Auxiliary 12V power fuse
F3 (900mA) Siren/Bell output fuse
F4 (900mA) Network fuse
Housing (Polymer)
3mm Polycarbonate
Dimensions (Small) (W x H x D)
282mm x 225mm x 80mm
Dimensions (Large) (W x H x D)
305mm x 263mm x 98mm
Battery Compartment
One 12V 7.0Ah battery
Packed Weight
1.2 - 1.5 Kg (Approx)
All Models Metal
Current
Current Consumption
50mA
Maximum Current Available
0.3A charge
1.0A
0.75A charge
1.9A
Rated Output
Battery
Arrangement
Battery
Charge
Rated Output (Amps)
12h
24h
30h
60h
1 x 7Ah
0.3A
0.533A
0.241A
0.183A
X
1 x 17Ah
0.3A
1.36A
0.658A
0.516A
0.233A
0.75A
1.0A
0.658A
0.516A
0.233A
Standby and Recharge Times
EN50131-1
Grade 1
Grade 2
Minimum Standby Period
12h
12h
Maximum Recharge Time
72 Hrs
72 Hrs
Jumper Settings
Battery Arrangement
Recharge Time
Charge Selection
1 x 7Ah
< 24Hrs
0.3A
1 x 17Ah
< 24Hrs
0.75AA
< 72Hrs
0.3A
Control Panel
Rated Input:
Rated Output Current@40°C:
220V - 240V @50/60Hz; 1A
2.5A MAX
Rated Input:
Rated Output Current@40°C:
100VV - 120V @50/60Hz; 1A
2.3A MAX
Rated Output Voltage:
13.7Vdc +/- 2%
Mains Terminal Block Fuse:
250Vac; 3-3.15A Slow/Medium Blow
Rated Input:
Rated Output Current@40°C:
220V - 240V @50/60Hz; 1A
2.5A MAX
Maximum rating of each power output (note that these are not considered to
be "independent power outputs" according to EN50131-6
Aux 12V
Siren
Network
Battery
1.0A
1.0A
1.0A
2.5A
Standby Current
50mA
Output Voltage Range:
13.0V to 13.9V
Maximum Ripple Voltage:
0.5V pk-pk
Battery type:
sealed lead acid, up to 7Ah, Maximum
recharge time 72h
Battery Low Voltage Signal:
10.5V
Deep Discharge protection:
8.0V
Fuses (Electronic PTC)
F1 (2.5A) Battery Fuse
F2 (900mA) Auxiliary 12V power fuse
F3 (900mA) Siren/Bell output fuse
F4 (900mA) Network fuse
Housing (Metal)
1mm Steel
Dimensions (W x H x D)
315mm x 415mm x 100mm
Battery Compartment
Up to One 12V 18Ah battery
Packed Weight
4.0Kg (Approx)
All Models
Electrical
Current Consumption
Quiescent Current:
Alarm:
<50mA
<150mA
Zones
Number:
EOL Resistor Value:
8
3K3
Panel Outputs
O/P 1 - Supervised:
O/P 2 - Supervised:
O/P 3 - 8:
1A switched to 0V
1A switched to 0V
100mA switched to 0V
Siren Output (Supervised)
Speaker Mode:
Bell Mode:
Minimum load 4
1A switched to 0V
2-Wire Smoke Detectors:
ESL429CT
System Sensor 2100TS
Onboard Communicator
Protocols:
Pulse Format, Express Format, Fast
Format, Contact ID, SIA Level 2/3,
Pager and Mobile Phone
Dialling Formats:
REN:
Approval:
Pulse or DTMF
1
CTR21, DPT-TE-001
Non Volatile Memory Component
412, 412 Plus, 816, 816 Plus:
832
24LC128
24LC256
EN50136-1-1 & EN50136-2-3
The inbuilt communicator complies with the requirements of EN50136-2-3 ,
EN50136-1-1 and are suitable for use in systems designed for use with ATS
levels 1 or 2 and environmental class 1 or 2 – i.e. systems using notification
options up to and including 2B. With the PSTN functioning normally, the ATS will
comply with the required performance levels subject to the ARC being suitably
equipped.
 These units may be used for Downloading, Remote Servicing or
SMS text messaging purposes in systems at ALL security
grades.
Environmental
Operating Temperature:
-10C to +55C
+14F to +131F
Maximum Humidity:
95% non-condensing
EMC Environment:
Residential/Commercial/Light
Industrial or Industrial