Texecom Premier 816 - Toggle Chime on and off; Change User Code; View Log (LCD Only); Abort Communications

Premier 412/816/832 Installation Manual Operating the Alarm System
INS159-13 77
Anti-code Reset
This feature is normally used in the UK where users are not
permitted to reset the panel following a communicated alarm.
However, the user can reset the panel after entering a unique
remote reset number, which is supplied by their installer or ARC.
 To perform an Anti-code Reset, proceed as follows:
Quote Code> 4855
Enter e>????
E to Arm?
MEU or Otion

????
????
Toggle Chime On and Off
When a zone is enabled for Chime the keypad will generate a
Chime tone every time the zone is violated. This function allows you
to turn the Chime feature on and off.
 To toggle Chime on and off, proceed as follows:

????
Premier 816
17:30.21 28/04
C
E to Arm?
MEU or Otion
b
@
e
b@
e
Change User Code
All users of the alarm system can change their own Access code
number.
 To change your Access code, proceed as follows:
E to Arm?
MEU or Otion
Code : ******
????


????
Code : ****
????
b@
e
b@
e
b@
e
View Log (LCD Only)
The control panel has an Event Log, which stores all system activity
i.e., users entering their codes to arm and disarm the system, alarm
events, faults etc. Each event is time and date stamped.
 To view the Event Log, proceed as follows:
Bedroom 1 PA
1... 13:15.56 28
PA Aud 02 Am
13:15.56 28/04

E to Arm?
MEU or Otion

????


Abort Communications
This option aborts any communications to the Alarm Receiving
Centre.
 To Abort Communications, proceed as follows:

????
Premier 816
17:30.21 28/04
E to Arm?
MEU or Otion
b@
e
b@
e