Prioritisation of signal and message processing indications.
First alarm indications followed by any other events during that set
period, will be reported on the keypad and will scroll, viewing of
these events can be controlled by the up and down key U on the
keypad.
Compliance Label
If the system is programmed to NOT comply with the requirements
of EN50131-1 or EN50131-3 , or the system is installed at Grade 1
then the compliance label must be removed.
Inhibit functions
For Alarms and Tamper the inhibit function is controlled by the
Swinger shutdown counter which is programmable and is defaulted
to 3.
See page 27 & 34 for details.
Minimum Logical Keys
10,000 for 4 digit code
100,000 for 5 digit code
1,000,000 for 6 digit code
User codes must be programmed to be a 6 digit code to
comply with INCERT
The number of disallowed codes
Premier 412 = 0
Premier 816 = 0
Premier 832 = 0
Dependant on the use of the Black Listed codes function
available via Wintex, a maximum of 16 codes may be Black Listed
Warranty
All Texecom products are designed for reliable, trouble free operation. Quality
is carefully monitored by extensive computerised testing. As a result the
control panel is covered by a two-year warranty against defects in materials or
workmanship.
As the control panel is not a complete alarm system but only a part thereof,
Texecom cannot accept responsibility or liability for any damages whatsoever
based on a claim that the control panel failed to function correctly.
Due to our policy of continuous improvements Texecom reserve the right to
change specification without prior notice.
To Next Page
Loading...
