iCNC PERFORMANCE
Manual 0-5399 SPECIFICATIONS 2-1
SECTION 2: SPECIFICATIONS
2.1 System Description
iCNC Performance is intended for shape cutting control. iCNC Performance has motion control, I/O, user interface and an
optional plasma height control built all in one package. These units are not field repairable. Unauthorized opening of the unit
will void the warranty.
2.2 Specification
Processor 2, Intel (secondary processor for motion & I/O)
Operating system Windows 7 Embedded
Ram 2GB
Ethernet ports 1 RJ-45 and 1 WLAN
USB ports 2, 1 On back wall (USB2.0) + 1 On door (USB2.0)
Serial ports 1 RS-422/485 port on d-sub 9 pin
Hard drive 120GB SATA SSD
Operating console Total of 35 buttons and a digital potentiometer
Display 15” With touch panel (resistive)
Number of I/O 20 outputs and 16 inputs
I/O type Outputs and inputs are grounding
Axes available 1-2 Y, 1 X, optional 1Z (iHC)
Default drives interface Analog +-10V speed signal, step/direction (2 axis command), incremental encoder inputs
Integrated plasma height control Optional iHC height control
CNC input power volts (amps) 24VDC (5A), with optional iHC 24VDC 6A.
CNC protection device Automatic fuse
!
CAUTION
See full technical details from the service manual 0-5401
!
WARNING
Do not operate or service the device without proper training.
www.TechnicalBooksPDF.com
To Next Page
