Model 310 Series DH Incubator 10-1Thermo Scientific
Section 10
Warranty Information
THERMO FISHER SCIENTIFIC DIRECT HEAT INCUBATOR WARRANTY USA*
The Warranty Period starts two weeks from the date your equipment is shipped from our facility. This allows shipping time so the warranty will go
into effect at approximately the same time your equipment is delivered. The warranty protection extends to any subsequent owner during the first
year warranty period.
During the first year, component parts proven to be non-conforming in materials or workmanship will be repaired or replaced at Thermo's expense,
including labor. In addition, after the initial warranty period of one year the CO
2 sensor (IR) will be warranted for a second year, parts only. The CO2
sensor (T/C) will be warranted for four additional years for a total of five years, parts only. Installation and calibration is not covered by this warran-
ty agreement. The Technical Services Department must be contacted for warranty determination and direction prior to performance of any repairs.
Expendable items, glass, filters and gaskets are excluded from this warranty.
Replacement or repair of components parts or equipment under this warranty shall not extend the warranty to either the equipment or to the com-
ponent part beyond the original warranty period. The Technical Services Department must give prior approval for return of any components or
equipment. At Thermo's option, all non-conforming parts must be returned to Thermo postage paid and replacement parts are shipped FOB destina-
tion.
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER WRITTEN, ORAL OR IMPLIED. NO
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY. Thermo shall not be liable for
any indirect or consequential damages including, without limitation, damages relating to lost profits or loss of products.
Your local Thermo Sales Office is ready to help with comprehensive site preparation information before your equipment arrives. Printed instruction
manuals carefully detail equipment installation, operation and preventative maintenance.
If equipment service is required, please call your Technical Service Department at l-800-438-4851 (USA and Canada) or 1-740-373-4763. We're
ready to answer your questions on equipment warranty, operation, maintenance, service and special applications. Outside the USA, contact your local
distributor for warranty information.
ISO
9001
REGISTERED
Rev. 4 4/09
To Next Page
Loading...
