Clean the humidity pan with soap and water and a general use laboratory
disinfectant. Rinse with sterile water and spray with 70% alcohol. The
humidity pan may be autoclaved.
For side-by-side operation or changing lab layouts, the inner and outer
doors are field reversible. The procedure is written from the prospective of
changing the door swing from a left-hand to a right-hand swing. All screw
holes are pre-drilled for reversing the door. The tools required are a
Phillips screwdriver, a 1/8” Allen wrench and a flatblade screwdriver.
The door reversing procedure takes about 30 minutes.
Model 310 Series DH Incubator 5-3Thermo Scientific
Section 5
Routine Maintenance
Reversing the Door
Swing
Cleaning the Humidity
Pan
Figure 5-1. Door Swings
To Next Page
Loading...
