Thinkware H100 - Page 18

© 2016 THINKWARE. All rights reserved.
Confidential Restricted
Order of mounting a front camera
⑤
⑥
Remove the A pillar by
pulling it toward the
driver’s seat. If it is
fixed by a hook, then
use the remover and
twist it 90 degrees to
remove it.
Make sure that the
cable penetrates
from the fuse box to
the A pillar when you
wire it.
⑦
⑧
While the hardwiring cable
is connected to the fuse,
turn on the terminal and
ensure it is powered up
properly.
(Ensure the booting is
completed successfully.)
Insert the cable
between the main
body and the
weather strip
when you try to
recover the A
pillar and the
weather strip.
9