© 2016 THINKWARE. All rights reserved.
Confidential Restricted
Order of mounting a front camera (LCD type)
While the hardwiring cable is
connected to the fuse, turn on
the terminal and ensure it is
powered up properly.
(Ensure the booting is finished
successfully.)
⑨ ⑩
Insert the remaining cable
between the front glass and the
indoor material(ceiling) and
nicely arrange the cable.
Select a location to attach
the holder. Install the lens
of the dash cam to the
center behind the rearview
mirror. Use a clean cloth
to wipe it.
Using both hands, apply
force to a holder so that
the 3M double sided tape
is firmly attached.
(Pay special attention so
that there will be no
bubbles formed in the 3M
double sided tape.)
⑫
11
⑪
Tell the customer to
wait for one day(24
hours) before mounting
a dash cam so that the
3M tape is completely
fixed to the holder.
To Next Page
Loading...
