EasyManuals Logo

THORLABS DCC1645C Description And Sdk Manual

THORLABS DCC1645C
513 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #98 background imageLoading...
Page #98 background image
© 2016 Thorlabs Scientific Imaging96
DCx Camera Functional Description and SDK Manual
The following table shows the effect of the Wait parameter depending on the image capture mode:
Parameter
Wait
Image capture
mode
Function
returns
Timeout for 1st image
Timeout for subsequent
images
*1
IS_DONT_WAIT
HW trigger
Immediately
API default or user-
defined value
*3
API default or user-
defined value
*3
IS_WAIT
HW trigger
When 1st
image in
memory
API default or user-
defined value
*3
API default or user-
defined value
*3
Time t
Value range
[4…
429496729]
HW trigger
When 1st
image in
memory
Time t in steps of 10 ms
(40 ms to approx. 1193 h)
API default or user-
defined value
*3
IS_DONT_WAIT
Freerun/SW
trigger
Immediately
Calculated internally by
API
*2
Calculated internally by
API
*2
IS_WAIT
Freerun/SW
trigger
When 1st
image in
memory
Calculated internally by
API
*2
Calculated internally by
API
*2
Time t
Value range
[4…
429496729]
Freerun/SW
trigger
When 1st
image in
memory
Time t in steps of 10 ms
(40 ms to approx. 1193 h)
Calculated internally by
API
*2
*1 Only with continuous image capture using is_CaptureVideo()
*2 The timeout is calculated from the exposure time setting, the image transfer time (depending on
the pixel clock) and the optional trigger delay (see is_SetTriggerDelay()); it is at least 40 ms.
*3 The default value of the uc480 API is 60 s. User-defined values can be set using the
is_SetTimeout() function.
Function list
is_CaptureVideo()
Captures a live video.
is_FreezeVideo()
Captures an image and writes it to the active image memory.
is_ForceTrigger()
Forces image capture in hardware trigger mode.
is_HasVideoStarted()
Returns whether the capture process has been started or not.
is_IsVideoFinish()
Returns whether the capture process has been terminated or not.
is_SetSensorTestImage()
Enables test image output from sensor (all cameras).
is_StopLiveVideo()
Terminates the capturing process (live video or single frame).

Table of Contents

Other manuals for THORLABS DCC1645C

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the THORLABS DCC1645C and is the answer not in the manual?

THORLABS DCC1645C Specifications

General IconGeneral
BrandTHORLABS
ModelDCC1645C
CategorySecurity Camera
LanguageEnglish

Related product manuals