To Next Page

To Previous Page

4 Programming (SDK)

129

Sample 2 for sequence AOI mode

AOI_SEQUENCE_PARAMS Param;

// Set parameters of AOI 2

Param.s32AOIIndex = IS_AOI_SEQUENCE_INDEX_AOI_2;

Param.s32NumberOfCycleRepetitions = 1;

Param.s32X = 100;

Param.s32Y = 200;

...

INT nRet = is_AOI(m_hCam, IS_AOI_SEQUENCE_SET_PARAMS, (void*)&Param, sizeof(Param));

// Get parameters of AOI 2

Param.s32AOIIndex = IS_AOI_SEQUENCE_INDEX_AOI_2;

nRet = is_AOI(m_hCam, IS_AOI_SEQUENCE_GET_PARAMS, (void*)&Param, sizeof(Param));

Sample 3 for sequence AOI mode

INT nMask = 0;

// Enable AOI 1, Disable AOI 2, 3 and 4

nMask = IS_AOI_SEQUENCE_INDEX_AOI_1;

INT nRet = is_AOI(m_hCam, IS_AOI_SEQUENCE_SET_ENABLE, (void*)&nMask, sizeof(nMask));

// Enable AOI 1 and 2

nMask = IS_AOI_SEQUENCE_INDEX_AOI_1 |

IS_AOI_SEQUENCE_INDEX_AOI_2;

nRet = is_AOI(m_hCam, IS_AOI_SEQUENCE_SET_ENABLE, (void*)&nMask, sizeof(nMask));

// Enable AOI 1, 2 and 3

nMask = IS_AOI_SEQUENCE_INDEX_AOI_1 |

IS_AOI_SEQUENCE_INDEX_AOI_2 |

IS_AOI_SEQUENCE_INDEX_AOI_3;

nRet = is_AOI(m_hCam, IS_AOI_SEQUENCE_SET_ENABLE, (void*)&nMask, sizeof(nMask));

// Enable AOI 1, 2, 3 and 4

nMask = IS_AOI_SEQUENCE_INDEX_AOI_1 |

IS_AOI_SEQUENCE_INDEX_AOI_2 |

IS_AOI_SEQUENCE_INDEX_AOI_3 |

IS_AOI_SEQUENCE_INDEX_AOI_4;

nRet = is_AOI(m_hCam, IS_AOI_SEQUENCE_SET_ENABLE, (void*)&nMask, sizeof(nMask));

// Get current AOI mask

INT nRet = is_AOI(m_hCam, IS_AOI_SEQUENCE_GET_ENABLE, (void*)&nMask, sizeof(nMask));

THORLABS DCU223 SERIES Description And Sdk Manual

Other manuals for THORLABS DCU223 SERIES