THORLABS DCU223 SERIES Description And Sdk Manual

© 2016 Thorlabs Scientific Imaging
4 Programming (SDK)
245
4.3.46 is_GetImageMem
USB 2.0
USB 3.0
USB 2.0
USB 3.0
Syntax
INT is_GetImageMem (HIDS hCam, VOID** pMem)
Description
is_GetImageMem() returns the pointer to the starting address of the active image memory. If you
use ring buffering, is_GetImageMem() returns the starting address of the image memory last used
for image capturing.
Input parameters
hCam
Camera handle
pMem
Pointer to the starting address of the image
memory
Return values
IS_CANT_COMMUNICATE_WITH_DRIVER
Communication with the driver failed because
no driver has been loaded.
IS_CANT_OPEN_DEVICE
An attempt to initialize or select the camera
failed (no camera connected or initialization
error).
IS_INVALID_CAMERA_HANDLE
Invalid camera handle
IS_INVALID_MEMORY_POINTER
Invalid pointer or invalid memory ID
IS_INVALID_PARAMETER
One of the submitted parameters is outside the
valid range or is not supported for this sensor or
is not available in this mode.
IS_IO_REQUEST_FAILED
An IO request from the uc480 driver failed.
Possibly the versions of the uc480.dll (API) and
the driver file (uc480_usb.sys) do not match.
IS_NO_SUCCESS
General error message
IS_SUCCESS
Function executed successfully
Related functions
is_GetImageMemPitch()
is_AllocImageMem()
is_AddToSequence()
is_SetImageMem()
is_SetAllocatedImageMem()
Sample programs
uc480PixelPeek (C++)

THORLABS DCU223 SERIES Specifications

General

Brand	THORLABS
Model	DCU223 SERIES
Category	Security Camera
Language	English